Whether you’ve seen it all over TikTok or stumbled across it while scrolling through your favorite beauty blog, the Vibely 4D Silk Fiber Lash Mascara has become a cult favorite for one reason: it promises the look of lash extensions without the salon price tag.

But if you’ve just unboxed your first tube, you might be wondering why there are two different caps (Step 1 and Step 2) and how exactly to use them to get those gravity-defying lashes.

Here is your ultimate guide on how to apply Vibely mascara like a pro!

What Makes Vibely Different?
Unlike standard mascaras, vibely mascara where to buy uses a dual-step system and silk fibers.

• Step 1: Gives you a natural, lengthened, and defined look.
• Step 2: Adds the « oomph » with thick fibers for maximum volume.

The secret? Both steps actually use the same wand! The « Step 1 » cap pulls the wand through a tighter opening to scrape off excess product, while the « Step 2 » cap allows more product and fibers to stay on the brush.

Step-by-Step Instructions for Perfect Lashes
Step 1: Prep Your Lashes
Start with clean, dry lashes. If you want an extra lift, use an eyelash curler for about 10 seconds before applying any product. This creates the « base » for the fibers to build upon.

Step 2: Apply Step 1 (Length & Definition)
Unscrew the top cap labeled Step 1. You’ll notice the wand looks relatively clean.

• Starting at the base of your upper lashes, wiggle the wand back and forth.
• Sweep the wand upward to the tips.
• This coat separates your lashes and coats them in the silk fiber formula, creating the foundation for length.

Step 3: Apply Step 2 (Volume & Drama)
While the first coat is still slightly tacky (don’t let it dry completely!), unscrew the larger cap labeled Step 2. The wand will have significantly more product on it.

• Focus Step 2 on the middle and outer corners of your lashes.
• Again, use a « zig-zag » motion at the roots and pull through to the ends.
• The fibers will latch onto the first coat, adding thickness and « 4D » volume.

Step 4: Layer for « Wow » Factor
If you’re going for a full-glam look, you can repeat Step 2 once more. However, be careful not to over-apply, as the fibers are very effective and too many layers can eventually lead to clumping.

Pro Tips for the Best Results

1. Don’t Pump the Wand: Never pump the mascara wand in and out of the tube. This pushes air inside, which dries out the silk fiber formula faster. Instead, swirl the wand gently.
2. The « Wiggle » Technique: Always wiggle the brush at the root. This ensures the base of your lashes is thick, which provides the « scaffolding » needed to hold up the long, fiber-filled tips.
3. Use a Lash Comb: If you find the fibers are sticking together, keep a clean lash comb or a dry spoolie nearby to brush through your lashes while they are still wet.
4. Bottom Lashes: For your bottom lashes, stick to Step 1 only. Step 2 is usually too heavy for the delicate lower fringe and might cause smudging.

How to Remove Vibely Mascara
Because this formula is designed to be long-wearing and smudge-proof, you can’t just splash it with cold water.

• Warm Water: The formula is often « tubing-style, » meaning it will slide off with warm water and a bit of gentle pressure.
• Oil-Based Cleanser: If you find it’s stubborn, use a cleansing balm or a dual-phase makeup remover. Let it sit on your lashes for 30 seconds to break down the fibers before wiping away.

Final Thoughts
Vibely Mascara is a game-changer for anyone with short or thin lashes. By mastering the two-step process, you can switch from a « clean girl » office look to a « red carpet » dramatic look in under two minutes.

Have you tried the Vibely 4D Mascara yet? Share your results in the comments below!